overcome in designing axial piston pumps-pg电子下载

  ·company news

international sales dept.                       

tel: 0086-574-86378895                 

fax: 0086-574-86378895

technology dept.

tel: 0086-574-86264491
e-mail: tech@zihyd.com
after-sales service dept.

tel: 0086-574-86378312

overcome in designing axial piston pumps
time: 2011-09-15 10:27:41 from:www.zihyd.com auhor:hydraulic motor click:2396

pump can contain most of the necessary circuit controls integrally (the swash-plate angle control) to regulate flow and pressure, be very reliable and allow the rest of the hydraulic system to be very simple and inexpensive. that is to say, choosing pg电子下载-pg电子游戏 for the goods are not as simple as people normally thought it is. it demands that company understand deeply their produce piston motor,hydraulic winch,gearbox,hydraulic steering unit,axial piston motor products and scale to get suitable ones.

an axial piston pump has a number of pistons (usually an odd number) arranged in a circular array within a housing, which is commonly referred to as a cylinder block, rotor or barrel. this cylinder block is driven to rotate about its axis of symmetry by an integral shaft that is, more or less, aligned with the pumping pistons (usually parallel but not necessarily).

designers have a number of problems to overcome in designing axial piston pumps. one is managing to be able to manufacture a pump with the fine tolerances necessary for efficient operation. the mating faces between the rotary piston-cylinder assembly and the stationary pump body have to be almost a perfect seal while the rotary part turns at, maybe, 3000 rpm. the pistons are usually less than half an inch (13 mm) in diameter with similar stroke lengths. keeping the wall to piston seal tight means that very small clearances are involved and that materials have to be closely matched for similar coefficient of expansion.

the pistons have to be drawn outwards in their cylinder by some means. on small pumps this can be done by means of a spring inside the cylinder that forces the piston up the cylinder. inlet fluid pressure can also be arranged so that the fluid pushes the pistons up the cylinder. often a vane pump is located on the same drive shaft to provide this pressure and it also allows the pump assembly to draw fluid against some suction head from the reservoir, which is not an attribute of the unaided axial piston pump.

an axial piston pump is a positive displacement pump that has a number of pistons in a circular array within a cylinder block. it can be used as a stand-alone pump, a hydraulic motor or an automotive air conditioning compressor

ningbo zhongyi hydraulic motor co., ltd has the experience in produce pg电子下载-pg电子游戏,pg电子下载-pg电子游戏 ,gearbox,hydraulic steering unit,axial piston motor with quality assurance. zhongyiyepk so welcome to our to choose our product or call us.

add:ningbo zhenhai economic development zone, road 88, china tel:86 0574-86261172-800 fax:86-0574-86288064